Panasonic CS-A28BKP5 Скачать руководство пользователя страница 22

Страница: 22 / 77

9 Operating Instructions

■

Do not install, remove and reinstall the unit yourself.
Improper installation will cause leakage, electric shock or fire. Please consult an authorized dealer or
specialist for the installation work.

To prevent personal injury, injury to others and property damage, the following instructions must be followed.

■

Incorrect operation due to ignoring of instructions will cause harm or damage, the seriousness of which is
classified as follows :

■

The instructions to be followed are classified by the following symbols :

Installation precautions

Before operating, please read the following “Safety Precautions” carefully.

■

This room air conditioner must be
earthed.

Improper grounding could cause
electric shock.

■

Do not install the unit in a place where
there may be explosive gas leaks.

Gas leaks near the unit could
cause fires.

■

Ensure that drainage piping is connected
properly.

Otherwise, water will leak out.

This symbol (with a white background) denotes an action that is
PROHIBITED.

These symbols (with a black background) denote an action that is
COMPULSORY.

OFF

Safety Precautions

Warning

This sign warns of death or serious injury.

Caution

This sign warns of injury or damage to property only.

Warning

Caution

CS-A28

BKP5/CU-A28BKP5

Содержание CS-A28BKP5














































































Результаты поиска

Содержание CS-A28BKP5

Отзывы:

Бренды по названию

Популярные бренды

Panasonic CS-A28BKP5, Руководство по обслуживанию

Результаты поиска

Содержание CS-A28BKP5

Отзывы:

Бренды по названию

Популярные бренды