1
Thank you for purchasing our Panasonic Room Air
Conditioner.
CONTENTS
:
Features ..................................................... 1
:
Safety Precautions ................................... 2
■
Installation Precautions
■
Operation Precautions
:
Name of Each Part ................................ 3~4
■
Indoor Unit
■
Outdoor Unit
■
Accessories
■
Remote Control
:
Preparation Before Operation ................. 5
■
Indoor Unit
:
How to Operate ..................................... 5~6
:
Setting the Timer ...................................... 7
:
Convenience Operation ........................... 7
■
Sleep Mode Operation
:
Care and Maintenance ......................... 7~8
■
Cleaning the Indoor Unit and Remote Control
■
Cleaning the Air Filter
■
Pre-season Inspection
■
When the Air Conditioner is Not Used for an
Extended Period of Time
■
Recommended Inspection
:
Helpful information .................................. 8
:
Energy Saving and Operation Hints ....... 8
:
Troubleshooting ....................................... 9
■
Normal Operation
■
Abnormal Operation
■
Call the Dealer Immediately
Note:
Before using your air conditioner, please read
this operating instructions carefully and keep it
for future reference.
FEATURES
●
Self-illuminating Button
For your convenience to operate in the dark.
(Refer page 4)
●
Automatic Operation
Sense indoor temperature to select the
optimum mode.
(Refer page 5~6)
●
Soft Dry Mode
Designed to be used when temperature is rather cool
but the humidity is high.
(Refer page 5~6)
●
Airflow Direction Auto-Control
Vertical airflow direction louver automatically swings
up and down.
(Refer page 6)
●
Air Circulation Mode
Circulates heated air downward, thus increasing
heating effectiveness.
(Refer page 6)
●
ON / OFF Dual Setting Timer
To program the room air conditioner to turn itself on
and to ensure you maximum comfort when sleeping.
(Refer page 7)
●
Sleep Mode
Prevent the room from getting too hot or too
cold while you are sleeping.
(Refer page 7)
!
Warning
1) If the supply cord is damaged or needed to be replaced, it
must be replaced by the manufacturer or its service agent or
a similarly qualified person in order to avoid a hazard.
2) Remove power plug or disconnect from the main before
servicing this appliance.
3) Do not repair by yourself.
In case of malfunction of this appliance, do not repair by
yourself. Contact the sales dealer or service dealer for a repair.
4) The appliance is not intended for use by young children or
infirm persons without supervision.
5) Young children should be supervised to ensure that they do
not play with the appliance.
6) Turn off the power (Isolation from main power supply).
Pull off the power plug from the receptacle, or switch off the
breaker, or switch off the power disconnecting mean to
isolate the equipment from the main power supply in case of
an emergency.
!
Caution
DISCONNECT THE MAIN PLUG FROM THE SUPPLY SOCKET
WHEN NOT IN USE, WHERE SUPPLY CONNECTION IS VIA
MAIN PLUG.
IMPORTANT
1. WHEN THE POWER CORD IS CONNECTED TO THE
MAIN THROUGH A MULTI POLAR SWITCH
THERE MUST BE A MULTI POLAR SWITCH
(DISCONNECTING MEANS) WITH A MINIMUM 3 mm
CONTACT GAP IN THE FIXED INSTALLATION CIRCUIT.
2. WHEN THE POWER PLUG IS CONNECTED TO THE
RECEPTACLE
Replacement or installation of power plugs shall be performed
by authorised/qualified personnel only.
The wires in this main lead are coloured in accordance with the
following code:
Green-and-Yellow
:
Earth
Blue
:
Neutral
Brown
:
Live
“As the colours of the wires in the main lead of this
appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follow :
The wire which is coloured green and yellow must be connected to
the terminal in the plug which is marked by the letter E or by safety
earth symbol
!
or coloured green or green and yellow.
The wire which is coloured blue must be connected to the
terminal which is marked with letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with letter L or coloured red.”
