17
Useful Information
11
Click [Next].
If the option is displayed, select the setting and click [Next].
l
[Reinstall with HDD recovery partition.]
Standard recovery method.
You can use recovery from Recovery Partition.
l
[Reinstall without HDD recovery partition.]
Increase usable HDD size.
You can NOT use recovery from Recovery Partition.
When this option is selected, you can no longer create Recovery Disc(s) after the recovery operation.
CAUTION
l
Carefully choose above item because you cannot change it later.
12 Click [Next].
If the option is displayed, select the setting and click [Next].
l
[Reinstall Windows to the whole Disk to factory default.]
Select this option when you want to install Windows to the factory default. After installation, you can create a
new partition. For how to create a new partition, refer to “To change the partition structure” (
è
page 9).
l
[Reinstall to the OS related partitions.]
*2
Select this option when the hard disk has already been divided into several partitions and you want to keep
the partition structure. For how to create a new partition, refer to “To change the partition structure” (
è
page 9).
*2
This does not appear if Windows cannot be installed to the recovery partition and the area usable by Windows.
13 At the confirmation message, click [YES].
14
Select language and system type (32bit or 64bit), then click [OK].
At the confirmation message, click [OK].
To cancel the recovery procedure, click [CANCEL], and click the
mark that appear the top right corner of
the screen.
/
Installation starts according to the instructions on the screen. (It will take approximately 30 - 45 minutes.)
l
Do not interrupt installation, for example by turning off the computer or pressing
Ctrl
+
Alt
+
Del
.
Otherwise installation may become unavailable as Windows may not start up or the data may be corrupted.
15 When Ending process screen is displayed, remove the Recovery Disc and DVD Drive
and then click [OK].
Follow the on-screen instructions.
Some models may take approximately 40 minutes.
16 Perform the “First-time Operation” (
è
page 8).
17 Start the Setup Utility and change the settings as necessary.
18 Perform Windows Update.
