20
Operating tracing memory (TMEM)
(continued)
Deleting tracing memory (DELETE)
1 .
Press one of the camera selection buttons
[CAMERA SELECT/GROUP SELECT] to select the
remote camera to be operated .
2 .
Press the TMEM button to turn on its indicator .
The tracing memory status appears.
The indicators of number buttons with registered tracing memory
turn on.
CAM1 TMEM
3m50s Remained.
Selected camera number
Remaining possible recording time (max . 5 m 00 s)
z
A button with no tracing memory registered does not turn on
even when it is a button with preset memory registered.
Note
3 .
Press the MEM DELETE button to turn on its indicator .
4 .
Hold down one of the number buttons [1] to [10] that
has its indicator turned on to specify the tracing
memory number .
The registered preset memory and tracing memory are deleted.
Restoring tracing memory (RESTORE)
1 .
Press one of the camera selection buttons
[CAMERA SELECT/GROUP SELECT] to select the
remote camera to be controlled from the unit .
2 .
Output the images to be shot to the monitor .
3 .
Press the TMEM button to turn on its indicator .
The tracing memory status appears.
The indicators of number buttons with registered tracing memory
turn on.
CAM1 TMEM
3m50s Remained.
Selected camera number
Remaining possible recording time (max . 5 m 00 s)
z
A button with no tracing memory registered does not turn on
even when it is a button with preset memory registered.
Note
4 .
Press the RESTORE button to turn on its indicator .
5 .
Press one of the number buttons [1] to [10] that has its
indicator turned on .
The remote camera moves to the start position.
The indicators of the number button that was pressed and START
button [11] blink. (Restore standby state)
z
At this time, you can operate the PAN/TILT lever to change the
start position.
TM03:0m00s
/0m50s
Standby Restore.
6 .
Press START button [11] .
The tracing memory is recalled and the remote camera starts
moving.
TM03:0m20s
/0m50s
Restoring.
Current recall position
Total time of tracing memory
during recalling
