-16-
Make sure that the positive (+) end and negative (
−
)
end of the wire are connected to the same signs on the
terminal.
Use a DC cable with a nominal cross section of 1.25
mm
2
or more that meets the UL specifications.
Terminal Board LAMP CONTROL (Wire
w
)
Connect it only in case of supplying power from LAMP
AC OUT on the Pan/tilt Head AC Adapter AW-PS300 to
the halogen lamp.
Connect it to LAMP CONTROL on the Pan/tilt Head AC
Adapter.
The symbols C and S of the wire must match the same
symbols on the terminal.
Use a cable with a nominal cross section of 0.3 mm
2
or
more that meets the UL specifications.
Terminal Board OP (Wire
e
)
Connect it only in case of using OP SW CONTROL
OUT on the Pan/tilt Head AC Adapter AW-PS300.
Connect it to OPTION SW CONTROL IN on the Pan/tilt
Head AC Adapter.
Use a cable with a nominal cross section of 0.3 mm
2
or
more that meets the UL specifications.
