-5-
q
Tilting Arm (supplied)
This arm tilts the head.
w
Tilting Arm Fixing Screws (supplied)
4 screws are supplied to fasten the tilting arm.
e
Camera Mounting Plate (supplied)
Used to fasten the camera.
r
Camera Guide Pin
This pin sets the mounting direction of the camera.
t
Camera Mounting Screw
This screw fastens the camera. (U 1/4”-20 UNC)
y
Panning Head
The head rotates in panning directions.
u
Tally Indicators (2 pcs.)
A selection signal lights them red.
i
Camera Connector Panel
To connect a camera and lens.
o
Base
!0
Mounting Holes
There are 4 holes to mount the pan/tilt head.
!1
Wire Rod Mounting Hole
To pass a wire to prevent the pan/tilt head from falling.
!2
Control Connector Panel
To connect a Control Panel (AW-RP301, RP305, or
RP501) or the Multiport Hub (AW-HB505) and Pan/tilt
Head AC Adapter (AW-PS300)
!3
Side Blank Panel
A spare to be used in changing the mounting position
of Control Connector Panel
!2
!4
Bottom Blank Panel
A spare to be used in changing the mounting position
of Control Connector Panel
!2
