-11-
æ ] w b h R l N ^ p l
R l N ^ p l
(t)
(t)
• Turn the panel 180°, and place it back in position.
• Fasten the panel with the screws.
■
Mounting the Pan/tilt Head
Observe the following instructions for mounting the
pan/tilt head.
Failure to observe these instructions could cause the
pan/tilt head to come off or drop, possibly resulting in
an accident.
• To mount the pan/tilt head, use the 4 mounting holes
and fasten the head securely.
• Have M6 hex bolts ready for mounting the head.
• The hex bolts must be long enough to meet the
requirement “mounting material thickness (t) plus 25
mm or longer.”
Camera Connector
Panel
i
Control Connector
Panel
!2
• Use plain and spring washers and hex nuts with the
hex bolts as shown in the figure.
• Use a wrench of the size that fits the hex bolt head to
tighten the hex bolts.
• To mount the pan/tilt head suspended, pass wire
through the anti-drop wire hole and fasten the pan/tilt
head to a ceiling or other firm object, securing it with
the wire.
• Have a wire ready strong enough to bear the overall
weight of the pan/tilt head, camera and lens.
∗
In mounting the pan/tilt head, never forcibly turn the
head or tilting arm in the arrow directions by hand.
