Panasonic AWE860N - COLOR CAMERA, Руководство по эксплуатации

Страница: 111 / 136

-39-
8
Black Level Setting [Pedestal: –150 to +150]
The black level (pedestal) of the luminance (Y) signal can
be set. Used in adjusting the black levels of two or more
cameras.
2 Color Set Display
9 Chroma Level Adjustment [Chroma Level: –3 to +3]
Chroma Level can be decreased or increased to any of
three levels each.The signal output to the optional card
cannot be adjusted.
:
Skin Color Adjustment [Flesh Tone: –3 to +3]
Skin color can be decreased or increased to any of three
levels each.
;
White Balance Setting
[White Bal: ATW, AWC A, AWC B, 3200K, 5600K]
ATW: The white balance is automatically adjusted to
the optimum position.
AWC A, AWC B:
Once the white balance is adjusted with the
ITEM/AWC switch on the back of the camera, it
is no longer necessary to set the white balance
again if you simply select AWC A or AWC B,
provided that the camera is used under the same
conditions.
Fine color adjustment can be made after setting
AWC by red/blue gain adjustment in user mode
or from the RCU (ROP).
3200K: The white balance is adjusted to 3200K
illumination.
• Only 0 dB, 9 dB, or 18 dB can be selected in case of
using the RCU.
Note
Remote control unit
Gain increase selector switch