Panasonic AWE860N - COLOR CAMERA, Руководство по эксплуатации

Страница: 109 / 136

-37-
$ Setting and changing of the setting
(Halogen Mode, Fluorescent Mode,
Outdoor Mode)
1 Brightness Set Display
1
Video Level Adjustment [Picture Level: –50 to +50]
Convergence level of AUTO IRIS, AUTO GAIN UP and
AUTO ND (ELC) can be adjusted.
2
Detecting Ratio Adjustment
[Light PEAK/AVG: P50 to A50]
The ratio of AUTO IRIS, AUTO GAIN UP and AUTO ND
(ELC) detected peak to average can be adjusted within a
predetermined range.
3
Photometric Measurement Method Setting
[Light Area: All, Center, Top cut, BTM cut, R/L cut]
A photometric measurement method can be selected for
AUTO IRIS, AUTO GAIN UP and AUTO ND (ELC).
All: All the screen area is measured.
Center: The screen is measured mainly in the center
area, about one-third of both the top and
bottom and one-third of both the right and left
portions of the screen are excluded from
measurement.
Top cut: About one-third of the top part of the screen is
excluded from measurement.
BTM cut: About one-third of the bottom portion of the
screen is excluded from measurement.
R/L cut: About one-third of both the right and left
portions of the screen are excluded from
measurement.
4 Auto ND (ELC) Setting [Auto ND (ELC): OFF, ON]
OFF: Luminance is not automatically adjusted by the
electronic shutter.
ON: The electronic shutter is controlled to automatically
adjust the luminance.
• ON is automatically selected when the electronic
shutter ( H ) on the submenu [Other Set] is set to [Auto
ND]. OFF is selected when other than [Auto ND] is
selected.
• ON is selected when the electronic shutter selector
switch is set to [ELC] in RCU mode, and OFF is
selected when it is set to other than [ELC].
Notes
Remote control unit
Electronic shutter selector switch