Panasonic AWE860N - COLOR CAMERA, Руководство по эксплуатации

Страница: 100 / 136

-28-
$ Gen-lock adjustment
Phase adjustments must be performed with the camera, the
RCU, ROP or the multi hybrid control panel when external
synchronizing signals are supplied to the system in cases
where multiple cameras are used or peripheral devices are
connected.
U
Horizontal phase control
Observe the waveform of the external synchronizing input
signal (black burst signal) and video output signal on a
two-channel oscilloscope. Then match the horizontal phase
of both signals by adjusting them with the horizontal phase
control of the camera, RCU, ROP or multi hybrid control
panel.
[ADJUSTMENT by CAMERA or the multi hybrid control
panel]
1. Press the NO/BAR switch for over 5 seconds to display
the color bar.
2. Select [G/L Adjustment] on the main menu, then select
[H Phase] on the submenu.
3. Adjust the horizontal phase with the YES/ABC and
NO/BAR switch.
For details on the menu operations using the multi hybrid
control panel, refer to the Operating Instructions of the multi
hybrid control panel.
External gen-lock input signal
(black burst output of special effect
generator)
Video signal
Adjust the horizontal phase
NO/BAR switch
YES/ABC switch