★
Procedure for switching over from Standby (lit in orange) to Turned-On state (lit in green) on
the camera linked to
“CAM1”.
①
Hold down the button [1].
– (Fig. 4-A) [POWER OFF] will be displayed on the LCD screen.
While the button [1] is held down, turn F2 dial
– (Fig. 4-B) to change the setting to [POWER: ON], and
then press F2 dial. The camera will switch over to POWER ON mode (turned-on).
※
If the setting is changed to [POWER: OFF] while being in the turned-on state, the camera will switch
over to Standby mode.
・
For details, please see the illustrated manual
“
Turning ON/OFF Remote Camera Using
AW-RP50
”.
3．
Turning AW-HE40 Camera On
(Turning ON)
Hold down Button 1
Turn F2
Press F2 to set
(Figure 4: AW-RP50 Control Panel)
（A）
（B）
(AW-RP50 LCD Panel)
CAM
［
1
］
<AW-HE40>
POWER
：
OFF
↓
CAM
［
1
］
<AW-HE40>
POWER
：
ON
↓
―――
This is the end of explanations of basic setting up.
―――
