Panasonic AV-HS60C3G, Руководство по эксплуатации

Страница: 74 / 176

– 74 –
Chapter 5 Basic Operations — Color corrector
Color corrector
This unit has a color corrector function that enables correction of the color in video signals.
Setting the color corrector
1
Select the <CC> button → [SDI IN 1] to [SDI IN 20] → the tab to be set.
f
Select the tab corresponding to the terminal for which you want to set the color corrector.
2
Select an item in [Enable] in the [Operation] column.
[ON] Enables the color corrector of the relevant channel.
[OFF] Disables the color corrector.
3
Select an item in [Limit] in the [Operation] column.
[Off] Does not restrict the color range of input signals.
[108] Restricts the amplitude level of the colors (R, G, and B) to 0% to 108%.
[104] Restricts the amplitude level of the colors (R, G, and B) to 0% to 104%.
[100] Restricts the amplitude level of the colors (R, G, and B) to 0% to 100%.
Initializing the color corrector
1
Select the <CC> button → [SDI IN 1] to [SDI IN 20] → the tab to be set.
f
Select the tab corresponding to the terminal for which you want to set the color corrector.
2
Select an item in [Init Target] in the [Setting] column.
[Process] Initializes the setting value in the [Process] column.
[Tone] Initializes the setting values in the [Tone1 Black]/[Tone2 Gray L]/[Tone3 Gray H]/[Tone4 White] column.
[RGB Matrix] Initializes the setting values in the [Matrix R/G]/[Matrix B] column.
[All] Initializes all.
3
Select [Initialize] in the [Setting] column.
f
The corresponding item is initialized.
Copying the setting
1
Select the <CC> button → [SDI IN 1] to [SDI IN 20] → the tab to be set.
f
Select the tab corresponding to the terminal for which you want to set the color corrector.
2
Select an item in [Copy Target] in the [Setting] column.
f
Select the tab for the copy source of the setting.
3
Select [Copy From] in the [Setting] column.
f
The setting of the selected tab is copied. However, the setting of the [Setting] column is not copied.
Process control
1
Select the <CC> button
→
[SDI IN 1] to [SDI IN 20]
→
the tab to be set.
f
Select the tab corresponding to the terminal for which you want to set the color corrector.
2
Set [Y-Gain], [Pedestal], [C-Gain], and [Hue] in the [Process] column.
[Y-Gain] Sets the gain value of the Y signal.
[Pedestal] Sets the value of the pedestal level (black level).
[C-Gain]
Sets the gain value of the saturation (Sat).
[Hue] Sets the amount of change of the hue (Hue).
Tone curve
Correct the tone of input images.
Set the tone curve to adjust the screen brightness and contrast.
Adjust R, G, and B separately to adjust white balance or tone.