Panasonic AV-HS60C3G, Руководство по эксплуатации

Страница: 52 / 176

– 52 –
Chapter 5 Basic Operations — Background transition
f
Set the transition time.
@ @ NOTE
t
The units used for time display of the unit can be set to either in seconds/frame or in frames. (page 118)
r
Setting the start and end points of a transition
1
Select the <ME1>/<ME2> button → [BKGD] → [Transition] tab.
2
Select [Margin Adjust] in the R menu, and set [Start Point] and [End Point] in the encoder menu.
[Start Point]
Sets the start point for the background transition.
The background transition will start after the start point of the manual transition or the auto transition when a value
larger than 0 is set for [Start Point]. At this time, the lamp for start point of the fader lever will blink in the transition status
display.
[End Point]
Sets the end point for background transition.
The background transition will complete before the end point of the manual transition or the auto transition when a value
larger than 0 is set for [End Point]. At this time, the lamp for end point of the fader lever will blink in the transition status
display.
f
While the <PATT LIMIT> button is lighting up, the settings of [Start Point] and [End Point] are disabled.
r
<NAM/CMIX> button setting
Set the behavior of background transition when the <MIX> button is on.
1
Select the <ME1>/<ME2> button → [BKGD] → [Transition] tab.
2
Select the items in [NAM/CMIX] and [Type] in the [NAM/CMIX] column.
f
The settings for [NAM/CMIX] are linked to the lighting status of the <NAM/CMIX> button.
[NAM/CMIX] items [Type] items Image operations
[OFF] ―
Images switch by overlapping.
During the transition, the output total of the A bus and B bus is kept at
100%.
[ON]
[NAM]
Switches the images in the A bus/B bus with non-additive mixing.
It will be high luminance with the A bus at 100% and the B bus at 100%
when the fader lever is positioned midway.
[CMIX]
The images are mid way between the A bus and B bus images,
becoming a MIX composition that is the color set in [CMIX Matte] in the
R menu. (Color mix composition)
r
Transition curve settings
1
Select the <ME1>/<ME2> button → [BKGD] → [Transition] tab.
2
Select the items in [MIX] and [WIPE] in the [Trans Curve] column.
f
The transition curve can be set individually for each of MIX and WIPE according to the selection state of the transition type.
[Linear] Straight line
[S Soft] A shallow S curve
[S Mid] An intermediate S curve
[S Hard] A deep S curve