Panasonic AV-HS410, Руководство по эксплуатации

Страница: 14 / 40

14
Installation and connections
p w
Connections with other devices
p q
Block diagram
SDI Input
1 to 8
Memory card
Input
A1, A2
Input
B1, B2
Output
A1, A2
Output
B1, B2
Black
STILL1, 2
CLIP1, 2
Input
matrix
ColorBar
Color
BKGD1, 2
SDI OUTPUT
1-1, 1-2
Output
matrix
SDI Output
1-1, 1-2 (*3)
SDI OUTPUT
2 to 5
SDI Output
2 to 5
DVI-D Output
~ AC IN
Power AC/DC
SDI IN
5 to 8
FS
UC
VPrc
DbyD
DVI-D OUT
Scaler
SDI IN
1 to 4
FS
VPrc
DbyD
BKGD
CUT, MIX, WIPE, DVE
KEY
CUT, MIX, WIPE, DVE
AUX 1 to 4
WFM
MEM PVW
FTB
Multi View
DSK
CUT, MIX
PinP1, 2
CUT, MIX
Option slot A
Option slot B
REF IN/OUT (*1)
REF OUT (*2)
Reference signal
TALLY/GPI 1
Dsub 15
GPI-IN: 8
GPI-OUT: 19
ALARM OUT: 1
GND:
2
TALLY/GPI 2
Dsub 15
Editing controller
Aux panel
VTR, etc.
Switching
hub
COM
Dsub 9
EDITOR
Dsub 9
LAN
RJ45
Remote camera Aux panel Computer
(*4)
(*5)
DVI-D IN
Scaler
DVI-D Input
*1:
When external synchronization is selected as the reference signal
setting, the reference signal is input.
When internal synchronization is selected, the reference signal is
output.
*2:
When external synchronization is selected as the reference signal
setting, the signals are looped through and output.
When internal synchronization is selected, the reference signal is
output.
*3:
Two sets of the same output signals are distributed from
SDI OUTPUT 1.
*4:
Use a crossover cable when connecting the unit and another
device on a 1:1 basis without going through a switching hub.
*5:
Use a switching hub.
Proceed with the connections after reading the section entitled
“Network security” (on page 6).