Panasonic AV-HS410, Руководство по эксплуатации

Страница: 18 / 40

18
1. Parts and their functions
1-1-1. Crosspoint area
AMBER : FILL / GREEN : SOURCE
KEY PinP1 PinP2 DSK AUX1 AUX2 AUX3 AUX4 DISP MV
AUX BUS DELEGATION
PGM
A
PST
B
AUX
1/13
2/14
3/15 4/16 5/17 6/18 7/19 8/20 9/21 10/22 11/23 12/24
AUX/DISP SOURCE
SHIFT
SHIFT
SHIFT
PGM PVW
 



4
PGM/A bus crosspoint buttons
[PGM/A 1 to 12]
These are used to select the PGM/A bus video signals.
Buttons 1 to 24 can be selected using the [SHIFT] button.

Refer to “1‑1‑2. Selecting the bus using the SHIFT
function” (<Operations and Settings> Operating
Instructions).
“A/B”, “PGM‑A/PST‑B” or “PGM‑B/PST‑A” can be selected
as the Bus Mode item by selecting the Config menu
following by the Operate sub menu.

Refer to “1‑1‑3. Selecting the bus mode” (<Operations
and Settings> Operating Instructions).
When one of the crosspoint buttons (
4
,
5
,
7
) is held
down, the name of the input material and the number of
the crosspoint button are displayed.
5
PST/B bus crosspoint buttons
[PST/B 1 to 12]
These are used to select the PST/B bus video signals.
Buttons 1 to 24 can be selected using the [SHIFT] button.

Refer to “1‑1‑2. Selecting the bus using the SHIFT
function” (<Operations and Settings> Operating
Instructions).
“A/B”, “PGM‑A/PST‑B” or “PGM‑B/PST‑A” can be selected
as the Bus Mode item by selecting the Config menu
following by the Operate sub menu.

Refer to “1‑1‑3. Selecting the bus mode” (<Operations
and Settings> Operating Instructions).
6
AUX bus selector buttons
(AUX BUS DELEGATION)
Select the bus to be operated using the AUX bus
crosspoint buttons (
7
).
The selected button lights.
[KEY]:
This button is used to change the AUX bus crosspoint
buttons (
7
) into the source selector buttons for the key
fill buses or key source buses.
Each time it is pressed, the selector button function
is switched between the key fill buses and key source
buses.
Amber Key fill buses
Green Key source buses
[PinP1], [PinP2]:
These buttons are used to change the AUX bus
crosspoint buttons (
7
) into the source selector buttons
for the PinP1 and PinP2 bus sources.
[DSK]:
This button is used to change the AUX bus crosspoint
buttons (
7
) into the source selector buttons for the DSK
fill buses or DSK source buses.
Each time it is pressed, the selector button function is
switched between the DSK fill buses and DSK source
buses.
Amber
DSK fill buses
Green
DSK source buses
[AUX1] to [AUX4]:
These buttons are used to change the AUX bus
crosspoint buttons (
7
) into the selector buttons for the
sources of the AUX buses.
[DISP] (built-in display):
This button is used to change the AUX bus crosspoint
buttons (
7
) into the source selector buttons for the
DISP buses (for the images which are shown on the
built‑in display).