2 – 10
Aquarea air/water heat pump – Installation manual for monobloc and split systems C, D and E series 05 / 2014
Safety instructions
Hazard instructions for avoiding electric shock and damage to health
2 Safety instructions
2.1 General hazard instructions for avoiding electric shocks
2.2 General hazard instructions to avoid damage to health
• Only qualified electricians may perform the electrical installation work .
• All service and maintenance work must also be performed by a certi-
fied electrician or an authorised dealer .
• Keep children and persons who are unfamiliar with the system clear
of the working area .
• When working on the device, comply with the national and local
standards and regulations .
• The cables and electricity connections, including existing connec-
tions, must be suitable for the electrical capacity of the heat pump .
• Do not use non-approved mains cables, modified cables or extension
cables to connect to the electricity mains .
• The device must be earthed correctly . It may not be earthed to gas
or water pipes, lightning conductors or the earthing of the telephone
system .
• Comply with the respective national wiring rules and safety
precautions for fault current . Panasonic recommends that
you use a RCD .
Danger!
Observe and comply with the following hazard instructions .
If you fail to do so, there is a danger of electric shock or fire .
Danger!
Observe and comply with the following hazard instructions . If you fail to
do so, there is a risk of fatal injury or damage to health .
• Work involving the refrigerant may only be performed by a qualified
person or an authorised dealer with a refrigerant handling certificate .
• The refrigerant can cause freezing if it comes in contact with skin .
• Only use the refrigerant specified . The refrigerant may not be mixed
with other types of refrigerant or replaced with other types of refrigerant .
Using other refrigerants can damage the device and result in safety
problems . The manufacturer accepts no responsibility or warranty if
