Panasonic AK-UC3000GS, Руководство по эксплуатации

Страница: 65 / 109

– 65 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[FILE NO.] Selects a file number.
When [MODE] is [LOAD]: [OFF], [1]…[8]
When [MODE] is [STORE]: [1]…[8]
f
Factory setting: [1]
[FILE NAME] Enters a file name. (15 characters or less)
f
Factory setting: [SCENE1]
[EXECUTE] Selects whether to execute with the configured settings.
[NO], [YES]
[ROP CONTROL]
Item Description of settings
[CONTROL ROTATION MODE] Sets the control rotation mode of ROP.
[MODE1], [MODE2]
f
Factory setting: [MODE2]
[SYSTEM MODE]
[FORMAT] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Item Description of settings
[FORMAT] Sets the system format.
[2160/59.94p], [2160/50p], [2160/29.97p], [2160/25p], [2160/23.98p], [1080/59.94p], [1080/50p],
[1080/29.97p], [1080/25p], [1080/23.98p]
f
Factory setting: [2160/59.94p]
[SHOOTING MODE] Sets the shooting mode.
[NORMAL], [HIGH SENS]
f
Factory setting: [NORMAL]
[CABLE CONNECTION] Set the connection method used between the camera and CCU.
[HYBRID], [FIBER]
f
Factory setting: [HYBRID]
[IN/OUT SELECT]
Item Description of settings
[CALL TALLY] Sets whether the rear tally lamp is to be lit up when called.
[OFF]: Turned off.
[R]: Red tally lights up.
[T]: Up tally lights up.
[R&T]: Red tally and up tally light up.
f
Factory setting: [OFF]
[TALLY GUARD] Enables/disables automatic white balance, automatic black balance, and automatic setup when the tally
lamp is lit.
[OFF], [ON]
f
Factory setting: [OFF]
[HD-SDI1 OUT] Configures the video output from the <HD SDI1> terminal.
[CAM]: Outputs camera images.
[HD PROMPT]: Outputs HD prompter video images.
f
Factory setting: [CAM]
[HD-SDI1 OUTPUT FORMAT] Sets the signal format of the video output from the <HD SDI1> terminal.
[1080i], [1080P]
f
Factory setting: [1080i]
[HD-SDI1 OUTPUT ITEM] Selects details of the characters superimposed on images output from the <HD SDI1> terminal.
[MENU ONLY]: Displays only on the menu.
[STATUS]: Displays all characters that are the same as in the viewfinder display.
f
Factory setting: [MENU ONLY]
[HD-SDI1 CHAR] Sets whether to superimpose characters on images output from the <HD SDI1> terminal.
[OFF], [ON]
f
Factory setting: [OFF]
[HD-SDI1 CHAR SIZE] Sets the size of the characters superimposed on images output from the <HD SDI1> terminal.
[LARGE], [SMALL]
f
Factory setting: [SMALL]
[HD-SDI2 OUT] Configures the video output from the <HD SDI2> terminal.
[CAM]: Outputs camera images.
[VF]: Outputs viewfinder images.
[RET]: Outputs return images.
[RET1], [RET2], [RET3], [RET4]: Outputs fixed return images.
f
Factory setting: [VF]
[HD-SDI2 OUTPUT FORMAT] Sets the signal format of the video output from the <HD SDI2> terminal.
[1080i], [1080P]
f
Factory setting: [1080i]