Panasonic AK-UC3000GS, Руководство по эксплуатации

Страница: 61 / 109

– 61 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[DETAIL GAIN( − )] Sets the detail level in the − (downward) direction.
[ − 31]…[ + 31]
f
Factory setting: [0]
[DETAIL CLIP + ]
Adjust the detail clip to reduce glare produced by an excess of details.
[00]…[63]
f
Factory setting: [0]
[DETAIL CLIP − ] Adjusts the length of the undershoot of the detail edge component.
[00]…[63]
f
Factory setting: [0]
[DETAIL SOURCE] Sets the RGB signal component ratio to create the detail.
[(G + R)/2], [(G + B)/2], [(2G + B + R)/4], [(3G + R)/4], [R], [G]
f
Factory setting: [(G + R)/2]
[KNEE APERTURE LEVEL] Adjusts the knee aperture level.
[00]…[39]
f
Factory setting: [5]
[DETAIL KNEE] Adjusts the detail components of knee.
[00]…[15]
f
Factory setting: [0]
[LEVEL DEPENDENT SWITCH] Enables/disables the function to remove details of dark areas.
[OFF], [ON]
f
Factory setting: [OFF]
[LEVEL DEPENDENT] Sets the level to remove details of dark areas.
[00]…[15]
f
Factory setting: [8]
[DARK DETAIL SWITCH] Enables/disables the function to emphasize details of dark areas.
[OFF], [ON]
f
Factory setting: [OFF]
[DARK DETAIL] Sets the level to emphasize details of dark areas.
[00]…[7]
f
Factory setting: [3]
[SKIN TONE DETAIL SETTING]
This item is not displayed in the 4K mode.
Item Description of settings
[SKIN TONE DETAIL] Enables/disables the skin tone detail function.
[OFF], [ON]
f
Factory setting: [OFF]
[SKIN GET] — Selects whether to automatically obtain the color saturation and hue information from the cursor position.
[NO], [YES]
[MEMORY SELECT] Selects the skin tone table of the subject to apply the skin tone table to.
[A], [B], [C]
f
Factory setting: [A]
[CURSOR] Shows/hides the box cursor in the center of the screen.
[OFF], [ON]
f
Factory setting: [OFF]
[H POSITION] Adjusts the horizontal position of the cursor.
[0%]…[100%] (0.25% step)
f
Factory setting: [50%]
[V POSITION] Adjusts the vertical position of the cursor.
[0%]…[100%] (0.25% step)
f
Factory setting: [50%]
[ZEBRA] — Enables/disables the zebra display.
[OFF], [ON]
f
Factory setting: [OFF]
[ZEBRA EFFECT
MEMORY]
Selects the table of the zebra display.
[A], [B], [C], [A + B], [A + C], [B + C], [A + B + C]
f
Factory setting: [A + B + C]
[SKIN TONE EFFECT MEMORY] Selects the skin tone table used to apply the skin tone detail.
[A], [B], [C], [A + B], [A + C], [B + C], [A + B + C]
f
Factory setting: [A + B + C]
[SKIN TONE CRISP] Adjusts the skin tone detail.
[ − 63]…[ + 63]
f
Factory setting: [ + 63]
[I CENTER] Sets the center position on the I axis (the area where the skin tone effect is applied).
[0]…[255]
f
Factory setting: [18]
[I WIDTH] Sets the width of the area where the skin tone effect is applied on the I axis with [I CENTER] being the
center.
[0]…[255]
f
Factory setting: [8]