– 12 –
Controls and Their Functions
Audio Function Section (1)
r
AUDIO LEVEL CH1 (audio channel 1 recording level) control
When the AUDIO SELECT CH1/CH2 switch
u
is set to MAN, the recording level of audio
channel 1 can be adjusted by this control in addition to the AUDIO LEVEL CH1 control
t
on
the side panel.
s
MIC IN (microphone input) jack (XLR, 3-pin)
Connect an optional microphone to this jack. The power for the microphone is supplied from
this jack.
t
AUDIO LEVEL CH1/CH2 (audio channel 1/2 recording level) controls
When the AUDIO SELECT CH1/CH2 switch
u
is set to MAN, the audio level of audio channels
1 and 2 can be adjusted using these controls.
However, the audio CH1 level can also be adjusted using the AUDIO LEVEL CH1 control
r
on
the front panel.
u
AUDIO SELECT CH1/CH2 switch (audio channel 1/2 auto/manual level adjustment selec-
tor) switch
This selects the method used to adjust the audio levels of audio channels 1 and 2.
AUTO: For adjusting the levels automatically.
MAN:
For adjusting the levels manually.
v
AUDIO IN (audio input selector) switch
This selects the input signals to be recorded on audio channels 1 and 2.
FRONT [MIC]: The microphone input signals connected to the MIC IN jack
s
are recorded.
REAR [MIC]:
The microphone input signals connected to the AUDIO IN CH1/CH2 connec-
tors
y
are recorded.
REAR [LINE]:
The line input signals connected to the AUDIO IN CH1/CH2 connectors
y
are recorded.
w
REAR MIC POWER switch
ON:
The phantom power is supplied to the rear microphone.
OFF:
The phantom power is not supplied to the rear microphone.
x
CUE switch
CH1:
The audio CH1 signals are recorded on the cue track.
1/2:
The signals of audio CH1 and CH2 are mixed together and recorded on the cue track.
CH2:
The audio CH2 signals are recorded on the cue track.
y
AUDIO IN CH1/CH2 (audio input channel 1/2) connectors (XLR, 3P)
An audio component or microphone is connected here.
z
AUDIO OUT connector (XLR, 3P)
This is connected to an audio component. The audio channels are coupled to the MONITOR
SELECT switch
and switched in tandem.
{
DC OUT (DC power output) connector
This is the DC 12 V output connector. A current of approximately 100 mA can be taken out.
s
r
The accessory
control knob can be
attached to the
AUDIO LEVEL CH1
control.
Knob
(included)
Screw
(included)
