Panasonic AJ-HPM100P Скачать руководство пользователя

Страница: 4 / 152

Read this first!

For AJ-HPM100P

FCC NOTICE (U.S.A.)

Declaration of Conformity

Model Number:

AJ-HPM100P

Trade Name:

PANASONIC

Responsible Party:

Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ07094

Support contact:

Panasonic Broadcast & Television Systems Company

1-800-524-1448

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

To assure continued compliance, follow the attached installation instructions and do not make any unauthorized modifications.

Note:

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The user may find the booklet “Something About Interference” available from FCC local regional offices helpful.

Warning:

To assure continued FCC emission limit compliance, the user must use only shielded interface cables when connecting to host

computer or peripheral devices. Also, any unauthorized changes or modifications to this equipment could void the user’s

authority to operate this device.

Содержание AJ-HPM100P

























































































































































Результаты поиска

Содержание AJ-HPM100P

Отзывы:

Похожие инструкции для AJ-HPM100P

Бренды по названию

Популярные бренды

Panasonic AJ-HPM100P, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPM100P

Отзывы:

Похожие инструкции для AJ-HPM100P

Бренды по названию

Популярные бренды