Panasonic AJ-HPM100P Скачать руководство пользователя

Страница: 34 / 152

Introduction: Recording, Playback and P2 Card Handling

◆

NOTE:

• Detailed check of P2 card status is possible. Refer to “Checking

Card Status” on page 58.

A continuous recording that is longer than the durations given

below when an 8 GB P2 card is used in this unit will result in

the automatic division of the recording into different clips.

Even so, the recordings on the two clips can be handled as a

single clip in thumbnail operations (display, delete, repair,

copy, etc.) on a P2 device.

Such a recording may be handled as separate clips in

nonlinear editing software or on PCs.

* Available when the optional AVC-Intra Codec board AJ-

YBX200G is installed

For the latest information not available in the Operating

Instructions of P2 cards and SD memory cards, visit the P2

support desk at the following Web sites.

For English: https://eww.pavc.panasonic.co.jp/pro-av/

P2 Card Access LEDs and P2 Card Status

P2 card access LED

P2 card status

Green light

Reading and writing are possible.

Orange light

Reading and writing are possible.

The card is selected for

recording.

Flashes orange

Reading and writing are possible.

Flashes rapidly in

orange

P2 card is being recognized.

Flashes green

The P2 card has no remaining

memory capacity. Available only

for reading.

The write-protection switch on the

P2 card is set to [PROTECT].

Available only for reading.

Off

The P2 card is not properly

formatted. Reformat the card on

this unit.

This card cannot be used in this

unit. Replace the card.

No P2 card has been inserted.

The unit is in the USB DEVICE

mode and is not accessing the P2

card.

Dividing clips over 4 GB in length

Recording format

Recording duration

DVCPRO HD

Approx. 5 min.

DVCPRO50

Approx. 10 min.

DVCPRO/DV

Approx. 20 min.

AVC-Intra50*

Approx. 10 min.

AVC-Intra100*

Approx. 5 min.

For the latest information on P2 cards and
SD memory cards

Содержание AJ-HPM100P

























































































































































Результаты поиска

Содержание AJ-HPM100P

Отзывы:

Похожие инструкции для AJ-HPM100P

Бренды по названию

Популярные бренды

Panasonic AJ-HPM100P, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPM100P

Отзывы:

Похожие инструкции для AJ-HPM100P

Бренды по названию

Популярные бренды