– 70 –
Setup menus
SYSTEM menu
Video output signal adjustments
A control matrix of the adjustments is shown below.
Ext. encoder remote:
Ext. encoder remote adjustment only.
Unit:
Setup menu adjustment only.
Ext. encoder remote/Unit:
Simultaneous adjustment from external encoder remote and setup menu is possible
but the result of adjustment from external encoder remote will not be reflected in the
setup menu.
05: ENCODER SEL
REMOTE
LOCAL
BOTH
06: V LEVEL CTRL
HD
SD
BOTH
HD
SD
BOTH
HD
SD
BOTH
650: Y LVL (HD)
651: P
B
LVL (HD)
652: P
R
LVL (HD)
653: BK LVL (HD)
External encoder remote controller
Not adjustable
Ext. encoder remote controller
Unit
Ext. encoder remote controller/Unit
Unit
Ext. encoder remote controller/Unit
654: Y LVL (SD)
655: P
B
LVL (SD)
656: P
R
LVL (SD)
657: BK LVL (SD)
Not adjustable
External encoder remote controller
External encoder remote controller
Unit
Unit
Ext. encoder remote controller/Unit
Ext. encoder remote controller/Unit
Settings
Item adjusted
<Note>
When the external
encoder remote controller
(AJ-ER50, option) is
used, VIDEO PHASE
and SYS PHASE of the
encoder remote controller
will not operate.
PARALLEL REMOTE output connector
The statuses established by a combination of more than one pin among the PARA OUT submenu (No.02) items are
shown below. Pin status “1” denotes active low and “0” denotes open.
(1) Error statuses
Pin 21
ERR0
0
0
0
0
Error status
SERVO NOT LOCKED
(Priority level 1)
SERVO LOCKED
(Priority level 4)
HIGH ERROR (amber)
(Priority level 3)
HIGH ERROR (red)
(Priority level 2)
Pin 24
ERR1
0
0
1
1
Pin 34
ERR2
0
1
0
1
(2) TC input statuses
Pin 35
TC SRC1
0
0
1
1
ETC input status
External SLTC
External LTC
External SVITC (for external VITC with SD input)
INT
Pin 36
TC SRC2
0
1
0
1
(3) Tape recording inhibit status
Pin 37
CAS IBH1
0
0
Tape recording inhibit status
Recording on cassette enabled
Accidental erasure of cassette recording inhibited
Pin 38
CAS IBH2
0
1