Panasonic AJ-HD1500P Скачать руководство пользователя | Manualshive

Страница: 16 / 126

background image

– 16 –

Controls and their functions

<Connector area>

5

TIME CODE IN connector

This is the connector for recording the external time code on the tape.

6

TIME CODE OUT connector

The playback time code is output from this connector during playback.
During recording, the time code generated by the internal time code generator is output.

7

CUE IN connector

The analog signal to be recorded on the CUE track is supplied to this connector. The audio
signals from a microphone can also be recorded by selecting the –60dB input mode on the
setup menu No. 705 (CUE IN LV).

8

CUE OUT connector

The analog signal recorded on the CUE track is output from this connector.

9

MONITOR OUT connector

During playback, the playback signals from the CUE track or PCM audio signal CH1, CH2,
CH3, CH4, CH5, CH6, CH7 and CH8 are output from this connector.

:

ANALOG AUDIO IN connectors

These are the input connectors for the analog audio signals (CH1, CH2, CH3, CH4).

;

ANALOG AUDIO OUT connectors

These are the output connectors for the analog audio signals (CH1, CH2, CH3, CH4).

<

<

<

<

<

HD SERIAL DIGITAL COMPONENT AUDIO VIDEO IN/OUT connectors/ACTIVE

THROUGH

These are the input and output connectors for the HD digital component audio and video
signals that comply with the SMPTE 292M standard.
The TC, menu or other information is output from the HD SDI MONITOR connector with
the information superimposed onto the signals.

=

SDTI IN/OUT connector (SDTI interface board, optional accessory)*

1

, SD SDI IN/

ACTIVE THRU (SD up-converter, optional accessory)*

2

*

1

: Connector for the input/output signals of compressed data complying with the SMPTE

305M, 321M standard

*

2

: Input connector enabling SD SDI signals complying with the SMPTE 259M-C standard

to be up-converted to the HD format and recorded

>

>

>

>

>

SD SERIAL DIGITAL COMPONENT AUDIO VIDEO OUT connectors

These are the output connectors for the digital component audio and video signals that
comply with the SMPTE 259M-C, 272M and 294M standards.
The signals are output during the playback of compatible DVCPRO25M, 50M, DV or
DVCAM format tapes or during down-conversion output.
The TC, menu or other information is output from the SD SDI MONITOR connector with
the information superimposed onto the signals.
Using setup menu item No.606 (SD MONI O SEL), the SD SDI MONITOR output signals
can be set to the same output as the SD SDI OUT1 (no superimposing).
When “SD SDI” has been selected as the setup menu item No.600 (VIDEO IN SEL)
setting and “THRU” as the No.107 (EE MODE SEL) item setting, the SD SDI MONITOR
output in the EE mode will not be subject to superimposing, and it will be set to the same
output as SD SDI OUT1. (The AJ-UC1500 board available as an optional accessory is
needed for “SD SDI” to be selected as the setup menu item No.600 setting.)

«
...
14
15
16
17
18
...
»

Содержание AJ-HD1500P































































































































Отзывы:

Нет отзывов

Похожие инструкции для AJ-HD1500P

Бренд: Sony Страницы: 4

Betacam SP 2000PRO PVW-2800P

Бренд: Sony Страницы: 8

Betacam SP 2000 Pro PVW-2600P

Бренд: Sony Страницы: 7

Бренд: Sony Страницы: 22

Бренд: Sony Страницы: 54

Бренд: Sony Страницы: 72

Бренд: Sony Страницы: 84

Digital 8 GV-D800

Бренд: Sony Страницы: 76

Digital8 GV-D200

Бренд: Sony Страницы: 76

Бренд: Sony Страницы: 94

Бренд: Sony Страницы: 102

Бренд: Sony Страницы: 124

Бренд: Sony Страницы: 120

Digital8 GV-D200E

Бренд: Sony Страницы: 112

Digital8 GV-D800E

Бренд: Sony Страницы: 112

DNW-A75 BETACAM SX

Бренд: Sony Страницы: 120

DSR 11 - Professional Editing Video Cassete recorder/player

Бренд: Sony Страницы: 124

DIGITAL 8 GV-D800E

Бренд: Sony Страницы: 112

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды