Panasonic AG-UX90, Руководство по эксплуатации

Страница: 89 / 206

- 89 -
≥ Register “EVF/LCD detail” to a USER button. ( l 79 )
[EVF/LCD DETAIL] helps you achieve focus easier by emphasizing the outlines of an image
displayed on the LCD monitor or the viewfinder. (
l 53 )
≥
These settings will not affect the images actually recorded.
≥ Register “Low Light mode” to a USER button. ( l 79 )
≥
Slide the AUTO/MANU switch to switch to Auto Mode.
Switch to Low Light mode, which is suited to recording under low light. ( l 68 )
≥
Register “Level Gauge” to a USER button. ( l 79 )
This function displays the horizontal/vertical tilt of the unit with the electronic level.
∫ To correct the tilt
≥
The horizontal tilt display
A
and vertical tilt display
B
appear yellow when there is a tilt, and
appear green when there is almost no tilt.
≥
The maximum tilt display angles are approximately 45
o
in horizontal direction and 10
o
in vertical
direction.
≥
The electronic level does not affect the actual recorded images.
≥ This function is not available in the following cases:
j
During Freeze Frame ( l 86 )
j When color bars are displayed ( l 98 )
≥
If [SELF SHOOT] ( l 173 ) is set to [MIRROR], the electronic level will not be displayed when you
record yourself.
≥
Even when the tilt is in the corrected state, an error of approximately 1
o
may occur.
≥ In the following cases, the electronic level may not be displayed correctly:
j
When moving this unit
j When pointing this unit up or down at an angle closer to perpendicular
≥
Register “Focus Macro” to a USER button. ( l 79 )
You can enable/disable Focus Macro.
≥
is displayed on the screen when [ON] is selected.
EVF/LCD detail
Low Light mode
Level Gauge
(Horizontal direction) (Vertical direction)
When correcting the leftward tilt When correcting the downward tilt
Focus Macro



AG-UX90EJ_DVQP1150ZA.book 89 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分