Panasonic AG-UX90, Руководство по эксплуатации

Страница: 154 / 206

- 154 -
When [ON] is selected, the Image Stabilizer works with customized [BLUR AMPLITUDE] and
[BLUR FREQUENCY] settings. (
l 50 )
This sets the blur amplitude of the Image Stabilizer during recording. ( l 50 )
This sets the blur frequency of the Image Stabilizer. ( l 50 )
When you press the WHITE BAL button, you can assign ATW.
This fine-adjusts the intensity of red. ( l 62 )
≥
This function’s default setting is “0”.
This fine-adjusts the intensity of blue. ( l 62 )
≥
This function’s default setting is “0”.
[CUSTOM O.I.S.]
[ON]/[OFF]
[BLUR AMPLITUDE]
[1]/[2]/[3]/[4]/[5]
[BLUR FREQUENCY]
[1]/[2]/[3]
[ATW SET]
[OFF]: Does not assign ATW when the WHITE BAL button is pressed.
[Ach]: Sets the White Balance mode to ATW when the WHITE BAL button is pressed to
switch to [Ach].
[Bch]: Sets the White Balance mode to ATW when the WHITE BAL button is pressed to
switch to [Bch].
[PRST]: Sets the White Balance mode to ATW when the WHITE BAL button is pressed to
switch to [PRST].
[ATW TARGET R]
[ATW TARGET B]
AG-UX90EJ_DVQP1150ZA.book 154 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分