Panasonic AG-UX90, Руководство по эксплуатации

Страница: 66 / 206

- 66 -
Gain adjustment
≥
Use the jog dial to change the settings.
≥ Switch to Manual Mode. ( l 44 )
1
Press the GAIN button to switch to [LOW GAIN], [MID GAIN], or [HIGH GAIN].
≥
The setting changes each time you press the button.
[LOW GAIN]
#
[MID GAIN]
#
[HIGH GAIN]
≥
It is possible to register gain values to [LOW GAIN], [MID GAIN], and [HIGH GAIN] and switch
between these values. (
l 152 , 153 )
≥
It is also possible to switch to the desired gain value by pressing the USER button to which
[LOW GAIN], [MID GAIN] or [HIGH GAIN] is registered. (
l 97 )
2
Push the jog dial.
3
Adjust the gain by rotating the jog dial.
Gain value:
0 dB to 30 dB
≥
Value closer to 0 dB darken the image.
≥ Value closer to 30 dB brighten the image.
≥
When [EXTENDED SENSITIVITY] is set to [ON], you can set a value between -3 dB and 30 dB.
(
l 149 )
≥
The selected gain value is not maintained if any of the following operations is performed:
j Pressing the GAIN button
j
Switching to Auto Gain Mode
≥ Auto Gain Mode is activated when one of the following operations is performed:
j
Setting [AGC] to [ON] and switching to Auto Mode
(
l 44
)
j Setting [LOW GAIN], [MID GAIN] or [HIGH GAIN] to [AUTO] and then pressing the GAIN
button to switch to the applicable gain setting.
1
Jog dial
2
GAIN button
A
Gain value
≥
In Auto Gain Mode, “AGC” is displayed; in Manual Gain Mode, the gain value is displayed in dB.
B
[GAIN]
ヴユロバ
ヱヶヴラ
ヴユヵ
GAIN



0dB

AG-UX90EJ_DVQP1150ZA.book 66 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分