Panasonic AG-HPX500, Руководство по обслуживанию

Страница: 19 / 191

INF-9
3-2. ADJUST menu
NOTE: Please do not change the setting of the items of “DEFFECT COMP”(only displayed in CAM mode),
“CAM DEBUG MODE”(only displayed in CAM mode), “DARK MODE”(only displayed in CAM mode),
“BATTERY TEST”(only displayed in CAM mode), “DEBUG DISP” and “DEBUG MODE”. These items
are for factory use only.
3-2-1. Adjustment item for Video Level
Y LEVEL
Y level of VIDEO OUT signal can be adjusted on this item.
The setting value is the same as value for Luminance level in Video Terminal Output Level adjustment (EVR).
C LEVEL
C level of VIDEO OUT signal can be adjusted on this item.
The setting value is the same as value for Chroma level in Video Terminal Output Level adjustment (EVR).
CMPNT Y LVL
Component Y level of COMPONENT OUTPUT signal can be adjusted on this item.
The setting value is the same as value for Component Y level in D-Terminal Output Level adjustment (EVR).
CMPNT PB LVL
Component PB level of COMPONENT OUTPUT signal can be adjusted on this item.
The displayed value is the same as value for Component PB level in D-Terminal Output Level adjustment (EVR).
CMPNT PR LVL
Component PR level of COMPONENT OUTPUT signal can be adjusted on this item.
The displayed value is the same as value for Component PR level in D-Terminal Output Level adjustment (EVR).
ADJUST MENU
Y LEVEL
C LEVEL
CMPNT Y LVL
CMPNT PB LVL
CMPNT PR LVL
DEFECT COMP
BATTERY TEST
DEBUG DISP
PUSH MENU TO RETURN
1Eh
1Eh
1Eh
1Eh
1Eh
0
OFF
OFF
Use the JOG dial button (or the Up and Down cursor
buttons) to select the item. And press the JOG dial
button (or the SET button) to make the setting (Then
setting value blinks). Use the JOG dial button (or the
Up and Down cursor buttons) to change the setting
value. Press the JOG dial button (or the SET button)
to value is fixed.