Panasonic AG-HPX500, Руководство по обслуживанию

Страница: 166 / 191

119
Setup menu list
C
h
ap
te
r 7 M
en
u O
p
er
at
io
n
s
OTHER FUNCTIONS screen
Item Description of settings (Items in bold are factory settings.)
USER FILE
Saves users files on, loads users files from the storage area of the camera (EEPROM), and initializes
the storage area.
●
----: Off (no operation)
●
LOAD: Loads the settings in a user file previously stored on the storage area.
●
SAVE: Saves the user file updated settings on the storage area.
●
INITIAL: Returns the user settings in the user file to their factory defaults.
• After a LOAD or INITIAL operation, turn the POWER switch off and then back on again to make the
new settings available.
• An INITIAL operation does not change the setting of the menu option TIME ZONE.
1394CONTROL
Sets the control method for backup recording using a backup unit connected to the 1394 terminal.
●
OFF: The backup unit is not controlled.
●
EXT: The backup unit can be controlled by the START/STOP button. The images shot by the camera
recorder are recorded by the backup unit. Note that the camera recorder does not record them.
●
BOTH: The images shot by the camera recorder are recorded by both the camera recorder and
backup unit.
●
CHAIN: When the camera recorder’s media approaches its end during shooting, the backup unit in
the recording standby mode automatically starts recording images.
1394CMD SEL
Sets how the START/STOP button works for the backup unit.
●
REC_P: This switches between recording and pause.
●
STOP: This switches between recording and stop.
If the backup unit does not have a rec pause function, select STOP.
PC MODE
Selects the terminal for data transfer. (You cannot select USB and 1394 at the same time.)
●
USB DEVICE: Mode for sending files using the USB connector.
●
1394 DEVICE: Mode for sending files using the 1394 connector.
●
1394 HOST: Mode for copying files from the P2 card onto an external hard disk drive using the 1394
connector.
ACCESS LED
Enables or disables the access LED. The L-SIDE is the left side as seen from the lens (the P2 card slot
side).
●
OFF L-SIDE: OFF R-SIDE: OFF
●
SLOT SIDE L-SIDE: ON R-SIDE: OFF
●
LCD SIDE L-SIDE: OFF R-SIDE: ON
●
BOTH L-SIDE: ON R-SIDE: OFF
ALARM
Turns the alarm function on and off.
●
ON , OFF
SAVE LED
Sets the SAVE lamp operation.
●
SAVE: Lights when the SAVE/STBY switch is set to SAVE. Off during recording.
●
P2CARD: Blinks when a warning message appears to indicate that there is little space left on a P2
card.
CLOCK SET Sets the camera-recorder’s calendar.
TIME ZONE
Adds to or deducts from GMT the time value of –12:00 to +13:00 in 30-minute steps. (As an exception,
you can set +12:45.) (Page XX)
●
+9:00
LANGUAGE
Sets the Menu language.
●
ENGLISH
●
JAPANESE
●
CHINESE
GL SELECT
Determines which signal to lock on to.
●
SDI
, COMPOSITE, COMPONENT
GL PHASE
Determines whether to perform a 90H shift (ON) or not (OFF).
●
ON,
OFF
H PHASE
Adjusts the phase.
●
–511 ~ 0 ~ +511
SYSTEM FREQ
Switches between NTSC and PAL.
●
59.94 Hz, 50 Hz