88
Chapter
4
Adjustments
and
Settings
for
Recording
NOTE
• Pressing the RESET button when an adjustable value is
selected in the setting menu EVF SETTING will return that
setting to its factory default.
• The LCD monitor will appear darker than usual if the camera
recorder is cold when it is turned on. The display will return
to its normal brightness as it warms up.
• The issues described below are viewfinder phenomena that
may occur under certain conditions but do not indicate a
malfunction. Nor do they affect recording or output signals.
- Primary colors (red, blue and green) may be seen when
moving eye position in the viewfinder.
- At low temperature, the screen image may have an irregular
pink cast.
- When the camera is off, there may be black stripes across
the screen. They disappear when the camera is turned on.
• Image lag may increase at low temperatures, but this is not a
malfunction.
Emphasizing Image Outlines
Emphasizing outlines of images in the viewfinder and on
the LCD monitor makes it easier to focus.
This function does not affect video output from the camera
or video recorded by the camera.
1
AdjustEVFPEAKLEVELandEVFPEAK
FREQintheDISPLAYSETUPscreen.
PUSH MENU TO RETURN
EVF PEAK FREQ
EVF SETTING
EVF B. LIGHT
EVF COLOR
ZEBRA1 DETECT
ZEBRA2 DETECT
0
LOW
>>>
NORMAL
ON
ZEBRA2
SPOT
100%
85%
EVF PEAK LEVEL
DISPLAY SETUP
Setting the viewfinder to
monochrome mode
Set the menu option EVF COLOR to OFF in the DISPLAY
SETUP screen to change the viewfinder to monochrome
mode.
