Panasonic AG-HPX370 Скачать руководство пользователя страница 139

Страница: 139 / 176

Chapter

Men
uOper

ations

Item

Setting

Notes

ONE SHOT TIME

Sets the duration for one-shot recording.

1frm, 2frm, 4frm, 8frm, 16frm, 1s

For details, refer to [One-shot recording (ONE SHOT
REC)] (page 43).

• Available only when REC FUNCTION

is set to ONE SHOT.

INTERVAL TIME

Sets the time interval of interval recording.

2frm, 4frm, 8frm, 16frm, 1s, 2s, 5s, 10s, 30s, 1min,
5min, 10min

For details, refer to [Interval recording (INTERVAL
REC)] (page 43).

• Available only when REC FUNCTION

is set to INTERVAL.

START DELAY

This delays the start of interval and one-shot recording
by about 1 second.

ON, OFF

• Available only when REC FUNCTION

is set to INTERVAL or ONE SHOT.

PREREC MODE

Sets PRE REC.

ON, OFF

For details, refer to [Pre-recording (PRE REC)]
(page 42).

• Not available in the following

conditions.
- When REC SIGNAL is set to 1394
- When SYSTEM MODE is set to 720-

59.94P (720-50P) and VFR is set to
ON.

- When REC FORMAT is set to native

recording.

- When SYSTEM MODE is set to 1080-

59.94i or 480-59.94i; and CAMERA
MODE is set to 24P or 24PA.

- When REC FUNCTION is set to

something other than NORMAL.

TC MODE

Sets count correction when using the internal time
code generator.

DF:

Drop frame time code

NDF:

Non drop frame time code

For details, refer to [Setting the Time Code] (page 69).

• This item is not displayed when

SYSTEM MODE is set to 50 Hz.

• Not available when operating at 24P,

24PA and 24PN is set to ON. Then
NDF is used at all times.

UB MODE

Sets the data recorded in the camera user bits.

USER, TIME, DATE, EXT, TCG, FRM.RATE

For details, refer to [Setting user bits] (page 67).

ONE CLIP REC

Sets one-clip recording mode.

ON, OFF

For details, refer to [One-clip recording] (page 44).

• Not available in the following

conditions.

- When REC FUNCTION is set to

something other than NORMAL.

- When REC SIGNAL is set to 1394.
- When VFR is set to ON

START TEXT MEMO

Sets whether to automatically add a text memo at the
recording start position each time you start recording.

ON, OFF

• Not available when REC FUNCTION is

set to something other than NORMAL.

• The text memo that is added when this

is set to ON indicates the recording
start position.
For details on recording the text memo
as text information, refer to [Setting of
Clip Meta Data] (page 119).

____ indicates the factory setting

Содержание AG-HPX370

















































































































































































Результаты поиска

Содержание AG-HPX370

Отзывы:

Panasonic AG-HPX370, Руководство по эксплуатации, Страница: 139 / 176

Результаты поиска

Содержание AG-HPX370

Отзывы: