126
Errors and warnings
Errors and warnings appear when something
goes wrong with the camera-recorder or a P2 card
malfunctions. If the problem cannot be solved by
turning off the camera-recorder and turning it back
on, try replacing the card and if that does not help,
it may be necessary to consult your supplier.
1394
This error occurs in a 1394 connection or when
signal faults occur.
1394 INITIAL ERROR:
a connection error
1394 INPUT ERROR:
an input error
1394 INPUT ERROR (OTHER FORMAT):
(different input format)
COPY INHIBITED:
This indicates that a copy-guarded signal
entered DV format input from the DVCPRO/DV
connector.
CLIP DISCONTINUED
This message appears in one-clip recording
mode when conformity errors occur in a complied
clip and the next recording cannot be complied to
the clip.
DIR ENTRY NG CARD
This message indicates that the directory on
the card has become corrupted and that normal
recording cannot be guaranteed if operation
continues. Make a quick backup of card data and
reformat the card.
EXTERNAL1394 DISCONNECT
This message appears when the menu option
1394 CONTROL in the OTHER FUNCTIONS
screen is set to EXT and recording is attempted
without connecting an external device to the
DVCPRO/DV connector.
FAN STOPPED
The fan has stopped.
Turn the power off immediately, discontinue use,
and contact your dealer.
FAN STOPPED HIGH TEMPERATURE
Due to the fan stopping, the interior of the
camera-recorder has become very hot.
The power switches off automatically.
Discontinue use and contact your dealer.
FORMAT ERR !
This indicates a P2 card that does not meet the
P2 card standard.
INCOMPATIBLE CARD
This message indicates that the inserted card
does not meet required standards and cannot be
used.
LOW BATTERY
This message indicates that the battery is
depleted.
PULL DOWN ERROR
Video pull-down sequence error in a mode such
as 24P
REC WARNING
This is displayed during a recording error. Do the
recording over. If this does not solve the problem,
consult your supplier.
CARD ERR (1) (2) (1/2)
The number indicates the P2 card that is giving
trouble.
• Turn the power off if the warning continues.
• If the warning persists after rerecording,
replace the card with another card.
ERROR:
Other causes
OVER MAX# CLIPS:
The limit for the number of clips that can be
recorded to one P2 card (up to 1000 clips) is
reached, and recording stops.
REC RAM OVERFLOW:
Overflow of recording memory
RUN DOWN CARD
This message indicates that a P2 card has been
overwritten the maximum number of times and
that normal recording cannot be guaranteed if
operation continues.
It is best to replace such P2 cards with a new
card.
SYSTEM ERROR
This message indicates that a system error has
occurred. This type of error can often be
corrected by turning off the power and turning it
back on again.
CAM LENS ERROR:
A camera-recorder lense error has occurred.
CAM MICON ERROR:
The microprocessor in the camera-recorder is
not responding.
P2 CONTROL ERROR:
A P2 control error has occurred.
P2 MICON ERROR:
The P2 microprocessor does not respond.
Screen displays (continued)
