For Long and Trouble-Free Operation: Warning and Error Messages
87
F
o
r L
ong
and
T
roub
le
-F
re
e
O
per
a
tio
n
The following warning messages appear when an incorrect operation is attempted in a thumbnail.
Display of thumbnail warning information
Item
Message
Description
Measure
Thumbnails
CANNOT ACCESS!
Data cannot be accessed because it is
corrupted or for other reasons.
Restore media and clips to normal state before access.
CANNOT CHANGE!
A thumbnail containing a grayed out text
memo
that cannot be generated is not
available for editing.
Edit settings or content to enable thumbnail display.
CANNOT DELETE!
Contents version mismatch prevents
deletion.
Match devices and contents version.
CANNOT FORMAT!
P2 card problem prevents formatting.
Check P2 card.
CANNOT
RE-CONNECT!
A clip that does not span multiple cannot be
reconnected.
Check selected content.
CANNOT REPAIR IN
SELECTION!
Some of the selected clip could not be
repaired.
Check selected content.
CANNOT REPAIR!
Selected content cannot be repaired.
Check selected content.
CANNOT SAVE! FILE
NAME IN USE
A configuration file with the same file name
already exists on the SD memory card.
Save to a different name.
CARD FULL!
The P2 or SD memory card is full.
Insert media with sufficient capacity.
INVALID VALUE!
Entered data was invalid.
Enter data in a valid range.
LACK OF CAPACITY!
There is not enough recording capacity left
on the card.
Insert a card with sufficient recording capacity.
MISSING CLIP!
All cards that contain the clip must be
inserted to allow attachment of shot marks.
Insert all cards that contain the clip.
NO CARD!
No P2 or SD memory card is inserted.
Insert compatible media.
NO COPY TO SAME
CARD!
A clip cannot be copied to the card storing
the original clip.
Copy the selected clip to a card that does not contain
the original clip.
NO INPUT!
No data is input.
Set after making input.
NO SD CARD!
No SD memory card is inserted.
Insert an SD memory card.
NOT SELECTED!
An attempt was made to delete an
unselected clip.
Select the clip you want to delete.
SAME CLIP IS
SELECTED!
The selected clips contain multiple copies of
the same clip (duplicated using COPY).
Multiple copies of the same clip (duplicated using
COPY) cannot be simultaneously copied. Deselect all
identical copies from the selected clips.
TOO MANY CLIPS!
Too many clips are selected.
Reduce the number of selected clips.
UNKNOWN
CONTENTS FORMAT!
This warning appears when data not
compatible with the unit is detected.
Match devices and contents version.
UNKNOWN DATA!
The meta data character code is invalid.
Use UTF-8 for the meta data character code. Use the
viewer to enter correct characters.
USER CLIP NAME
MODIFIED!
Characters in the clip name had to be
deleted in adding the counter value.
The user clip name plus the counter value can only
contain up to 100 bytes. Characters in the clip name are
automatically deleted when the total exceeds
100 bytes.
WRITE PROTECTED!
The P2 or SD memory card is write
protected.
Insert write-enabled media.
