62
Setup Menu: Menu items
Use this menu to set the time code.
TC/UB/CTL
Item
Settings and brief function description
XX indicates factory default settings.
SYSTEM FREQ
indications
Mode
2D
(Main)
3D
SYNC PB
CTL DISPLAY
Selects 12 or 24 hour clock for the CTL counter display.
±12h
: 12-hour clock display
24h
: 24-hour clock display
M
M
M
VITC BLANK
Specifies whether or not a VITC signal will be output at the
locations selected in the VITC POS-1 and VITC POS-2 menus.
BLANK
: VITC signals are not output.
THROUGH
: VITC signals are output.
NOTE:
• This setting is enabled only during VIDEO and SD SDI output.
• In EE mode, the input signal is output with the VITC signal.
M
M
M
VITC POS-1
Specifies the position where the VITC signal will be inserted.
When set to 59.94 Hz:
LINE 10 - LINE 16 - LINE 20
When set to 50 Hz:
LINE 7 - LINE 11 - LINE 22
NOTE:
• You cannot select the same line as in the VITC POS-2 menu.
• This setting is enabled only during VIDEO and SD SDI output.
• Pressing RESET will not restore the factory defaults.
• VITC signals are not output when 23.98 Hz, 24 Hz, 59 - 23 or
60 - 24 is set in the SETUP - SYSTEM - FREQUENCY menu
setting.
M
M
M
VITC POS-2
Specifies the position where the VITC signal will be inserted.
When set to 59.94 Hz:
LINE 10 - LINE 18 - LINE 20
When set to 50 Hz:
LINE 7 - LINE 12 - LINE 22
NOTE:
• You cannot select the same line as in the VITC POS-1 menu.
• This setting is enabled only during VIDEO and SD SDI output.
• Pressing RESET will not restore the factory defaults.
• VITC signals are not output when 23.98 Hz, 24 Hz, 59 - 23 or
60 - 24 is set in the SETUP - SYSTEM - FREQUENCY menu
setting.
M
M
M
TCG MODE
Sets the TC operating mode of the built-in time code generator.
REGEN
: Synchronizes the internal time code generator to
maintain the continuity with the time code last recorded on the
P2 card.
PRESET
: Starts recording from the value set with the TC
PRESET button.
EXIT
: Uses the external time code input from the TIME CODE
IN connector, video signal VITC or SLTC. Use menu (EXT TC
SEL) to set.
M
M
UBG MODE
Sets the UB operating mode of the built-in time code generator.
REGEN
: Synchronizes the internal time code generator with the
last user bits recorded on a P2 card.
PRESET
: Starts recording from the value set with the TC
PRESET button.
EXT
: Uses the external UB from the TIME CODE IN connector,
video signal VITC or SLTC. Use menu (EXT TC SEL) to set.
M
M
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
59.94 Hz
50 Hz
59.94 Hz
50 Hz
59.94 Hz
50 Hz
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23Hz
60-24 Hz
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
