Panasonic AFPXHEAD4, Руководство пользователя

Страница: 44 / 76

3.5.2 Analog Output Range Setting
When a set value is entered in the "Output range setting area" using the user program, the
analog output range is set in the unit
● When H1 to H7 is entered in the "Output range setting area", the analog output is started.
● If a change is made to the program after the mode is changed to the PROG. mode, cycle the
power.
■
Sample program
If an expansion is made to the 1st unit, set as follows using the user program to set the -10 to
+10 V range to CH0 and CH1 and the +4 to +20 mA range to CH2 and CH3.
R0
F0 MV H7744 WY36
■
Output range setting value
H1: 0 to +10 V
H2: 0 to +5 V
H3: 0 to +20 mA
H4: -10 to +10 V
H5: -5 to +5 V
H6: +1 to +5 V
H7: +4 to +20 mA
H0, H8 to F: Do not use the analog input.
■
I/O allocation
Channel Expansion location
1st unit 2nd unit 3rd unit 4th unit 5th unit 6th unit 7th unit 8th unit
CH0 to CH3 WY36 WY46 WY56 WY66 WY76 WY86 WY96 WY106
■
I/O contents
The range setting data for each channel data is allocated from the lower level in the order of
CH0, CH1, CH2, and CH3.
3.5 Analog Output Functions
3-18 WUME-FPXHAIO-01