Panasonic AFP7CCM1, Руководство пользователя

Страница: 99 / 139

9.2 Configuration
9-3
9.2 Configuration
9.2.1 Setting Communication Conditions

Configuration
Setting items Default Specification range Remark
Communication
mode
MEWTOCOL-COM
General-purpose
communication Specify "general-purpose
communication".
Station no. 1 1 - 999 Settings are not necessary.
Baud rate 9600
300 / 600 / 1200 / 2400
/ 4800 / 9600 / 19200 /
38400 / 57600 / 115200
/ 230400
Data length 8 bits 7 bit / 8 bits
Parity Odd None / Odd / Even
Stop bit 1 bit 1 bit / 2 bits
The setting must be done according to
the devices connected.
RS/CS Invalid Invalid / Valid
Set to "Valid" only when Communication
Cassette AFP7CCS2 is used in a 5-wire
mode.
Send waiting
time
(unit: 0.01 ms)
0 0 - 10000
Set this when it is necessary to delay
response to the partner device.
Start code STX Invalid Invalid / Valid
Terminator
setting
CR
CR / CR+LF / Time /
ETX
The setting must be done according to
the devices connected.
Terminator
judgment time
(unit: 0.01 ms)
0
0 - 10000
(0 - 100 ms)
In cases where "Time" is specified in the
terminator setting, set the time for judging
the terminator.
Modem
initialization
Do not initialize
Do not initialize /
Initialize while
performing settings /
Re-initialize while
performing settings
Perform settings only when a modem is
to be connected. Perform settings for
start-up modem initialization.
(Note 1) In general-purpose communication, the following setting items need not to be specified.
Station no., PLC link
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com