Panasonic AFP7CCM1, Руководство пользователя

Страница: 128 / 139

Specifications
11-4
11.1.2 Extension Cassette Communication Specifications

COM1 Port / COM2 Port
Description
Items
AFP7CCS1 AFP7CCS2 AFP7CCM1 AFP7CCM2 AFP7CCS1M1
Interface
3-wire
1-channel
RS-232C
3-wire
2-channel
RS-232C
(Note 1)
1-channel
RS-422/RS485
(Note 2) (Note 3)
2-channel
RS-422/RS485
(Note 2) (Note 3)
3-wire 1-channel
RS-232C
1-channel
RS485 (Note 3)
Transmission distance Max. 15 m (Note 4)
When RS-422 is used: Max. 400 m
When RS-485 is used: Max. 1200 m
(Note 5) (Note 6)
RS-232C:
Max. 15 m
RS-485:
Max. 1200 m
(Note 5) (Note 6)
Baud rate 300, 600,1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bit/s
Communication method Half-duplex transmission (Note 7)
Synchronous method Start stop synchronous system
Communication format
Data length: 7 bits / 8 bits, stop bit: 1 bit / 2 bits, parity: Yes / No (Odd / Even)
Start code: Without STX / With STX, end code: CR / CR + LF / None / ETX
Data transmission order Transmits from bit 0 character by character.
Communication
functions and
No. of units that can be
connected
PLC link: Max. 16 units
MEWTOCOL-COM (master/slave), MEWTOCOL7-COM (slave): Max. 99 units
MODBUS RTU (master/slave): Max. 99 units
General-purpose communication: Max. 99 units
Modem initialization
(Note 1) By switching on the dip switch on the cassette, you can use the unit as 5-wire 1-channel RS-232C.
(Note 2) By switching on the dip switch on the cassette, you can switch between RS-422 and RS-485.
(Note 3) When connecting a commercially available device that has an RS485/RS-422 interface, please confirm
operation using the actual device. In some cases, the number of units, transmission distance, and baud rate
vary depending on the connected device.
(Note 4) When communication is performed at a baud rate of 38400 bps or higher, use the cable not longer than 3 m.
For wiring the RS-232C, a shielded wire must be used to increase noise suppression.
(Note 5) The transmission distance is limited by the specified baud rate and No. of connected units in the RS-485
setting. When using a baud rate of 38400 bps or less, the allowable settings are a maximum of 1200 m and 99
units. When a C-NET adapter is mixed, the maximum number of connected units is 32, and the baud rate is
limited to 19200 bps or less.
(Note 6) The converter SI-35 manufactured by Lineeye Co., Ltd is recommendable for the RS485 at the computer side.
(Note 7) In general-purpose communication, RS-232C and RS-422 use full-duplex transmission.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com