Panasonic AFP7CCM1, Руководство пользователя

Страница: 84 / 139

MODBUS RTU
Master/Slave Communication
8-2
8.1 Configuration
8.1.1 Setting Communication Conditions

Configuration
Setting items Default Specification range Remark
Communication mode
MEWTOCOL-
COM
MODBUS-RTU Specify "MODBUS-RTU".
Station no. 1 0 - 247
Set a specific station no. for PLC to
be connected to the PLC link. Set a
value that does not overlap with
other devices.
Baud rate 9600
300 / 600 / 1200 / 2400 /
4800 / 9600 / 19200 /
38400 / 57600 / 115200 The setting must be done
according to the devices
connected.
Data length 8 bits 8 bits
Parity Odd Even
Stop bit 1 bit 1 bit
RS/CS Invalid Invalid / Valid
The setting must be done
according to the devices
connected. In general, 8-bit length,
even parity, and 1-stop bit is used.
Send waiting time
(set value × 0.01 ms)
0 0 - 10000
Set this when it is necessary to
delay response to the partner
device in slave communication.
Start code STX Invalid -
Terminator setting CR -
Terminator judgment
time
(set value × 0.01 ms)
0 -
Modem initialization Do not initialize -
Use the unit in the default setting
as indicated on the left.
(Note 1) In MODBUS communication, the following setting items need not to be specified.
Start code, terminator setting, terminator judgment time, modem initialization, PLC link setting
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com