Panasonic AFP7CCM1, Руководство пользователя

Страница: 54 / 139

Setting and Confirming Communication Conditions
5-2
5.1 Setting Applications and Communication Conditions
5.1.1 Applications to be Set for Each Port

Available functions for each communication port
Allocated communication port
Communication function to be used
COM.0 COM.1 COM.2 COM.3 COM.4
PLC link
●
Master
● ● ● ● ●
MEWTOCOL7
－
COM (Note 1)
MEWTOCOL
－
COM
Slave
● ● ● ● ●
Master
● ● ● ● ●
MODBUS-RTU
Slave
● ● ● ● ●
General-purpose communication
● ● ● ● ●
(Note 1) In MEWTOCOL7-COM, there is no master communication function.
5.1.2 Conditions to be Set for Each Port

Communication condition
Communication port Setting range Default
Station no.
1 - 99 (MEWTOCOL-COM)
1 - 999 (MEWTOCOL7-COM)
1 - 247 (MODBUS-RTU)
1
Baud rate 300,600,1200,2400,4800,9600,19200,38400,57600,115200,230400 9600
Data length 7 bits, 8 bits 8 bits
Parity None, Odd, Even Odd
Stop bit 1 bit, 2 bits 1 bit
End code CR, CR+LF, ETX , or time (0.01 ms – 100 ms, by the unit of 0.01 ms) CR
Communica
tion format
Start code With STX, Without STX
Without
STX
RS/CS controlled No/Yes Invalid
Send Waiting 0 to 100 ms 0 ms
Modem initialization Invalid, Valid, Re-initialization Invalid
(Note) Communication conditions that can be set vary by the mode to be used (PLC link, MEWTOCOL
communication, MODBUS-RTU, general-purpose communication).
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com