Panametrics DigitalFlow GC868, Руководство для стартапов

Страница: 57 / 90

DigitalFlow™ GC868 Startup Guide (1 and 2-Channel) 2-8
Chapter 2. Initial Setup
2.6.10 Transducer
Spacing
11. The
Transducer Spacing
prompt displays the spacing of the transducers, as
calculated from the information you have entered. Record this number in
Appendix B,
Data Records
, and use it to properly space the transducers.
Note: If necessary, you can overwrite the spacing shown at the previous prompt
(using the numeric keys) to match the actual physical spacing of the
transducers. Panametrics does not recommend overwriting the spacing. If
you must, do not change the spacing by more than ±10% from the value
calculated.
2.6.10.1 Procedure Options After completing the above steps, the meter returns to the User (or Channel)
Program
prompt. Continue as follows:
• To continue programming the meter, refer to the menu maps in the
Programming Manual
and navigate to the desired menu. Then, proceed to the
appropriate section of the manual for instructions.
• To leave the
User Program
and retain the previous settings, press [EXIT] once
(for a 1-channel GC868) or twice (for a 2-channel GC868) and then press [F1]
= NO at the SAVE prompt. Any programming changes will be discarded and
you will be returned to the data display.
• To leave the
User Program
and return to measurement mode, press [EXIT]
once (for a 1-channel GC868) or twice (for a 2-channel GC868) and then
press [F2] = YES at the
SAVE
prompt. Your programming changes will be
entered into the meter’s memory, and you will be returned to the data display.
Note: See the Programming Manual for instructions on using the SAVE submenu.
Proceed to Chapter 3, Operation , for instructions on taking measurements or refer to
the Programming Manual for instructions on programming the Model GC868’s
advanced features.