© Pan Acoustics GmbH
V 1.0
Page 6 of 7
Assembly Manual
TWM III
6. Transport and storage
The product is to be transported with care to prevent any damage that would impair its function.
The product is designed for both indoor and outdoor applications. Prolonged storage in liquids, e.g.
water, is to be avoided.
Install the pre-mounted mount
(loudspeaker) (C) into mount
(wall) (D).
Check all screw connections for fi rm fi t and friction locking. The individual assemblies are to be
checked to ensure that they are form fi tting, and screw connections are to be re-tightened where
appropriate.
5. Maintenance and care
The speaker accessory may show signs of wear over time, e.g. due to mechanical loads, corrosion or
improper handling. Therefore, for permanent installations, check the mount at regular intervals for
signs of wear and fi rm fi t.
When performing inspections, it is particularly important to watch out for deformations, cracks,
notches, damage on threads and corrosion. Mounting and fastening materials such as screws and
tensioning straps also need to be checked thoroughly for wear or deformation.
If the check reveals uncertainties or damaged parts, the speaker/mount may no longer be used. The
operator/user is required to be familiar with country-specifi c comprehensive testing regulations and
to apply them.
Fasten bracket (wall) (E) using
two screw fi xings suitable for
wall mounting.
Install the axle (F) with the
pre-mounted screw connection
(G+H) into holder (wall) (E).
Connect the Axle (F) with
screw (I) and washer (J) with
the mount (wall) (D) on top
and bottom.
Push the caps (K) onto the
screw connection.
