© Pan Acoustics GmbH
V 1.0
Page 5 of 7
Assembly Manual
TWM III
4.2. Assembly
Insert the slot nut (A) into the
rear slot of the speaker through
the opening in the cover.
Pre-mount the 2 set screws (B)
into the middle threads of the
slot nuts. Position the slot nut
at the midpoint of the speaker
and tighten the set screws so
that the slot nut can no longer
move.
Screw bracket (speaker) (C)
onto the mounted slot nut (A)
using 2 screws (D).
Improperly selected fastening material for wall or ceiling assembly may cause the speaker to fall
down.
Prior to assembly, it is necessary to check the wall or ceiling material to which the speaker is to be
fastened. Be sure to provide suitable fastening material (dowels and matching screws) for assembly.
Model
P 04
PB 04
P 08-Pi
PB 08
P 16-Pi
PB 16
PB 24
PB 32
PB 40
Brackets
1
1
2
2
4
5
Number of brackets depending upon speaker module
Depending upon the speaker, additional brackets may be required, see table.
I
J
K
