3
SkyPilot MetroPole is a flexible mount solution that simplifies installation
of SkyExtenders on light poles with photocell power connections. Sup-
porting installation on poles up to 3 inches in diameter and a 40 degree
incline, MetroPole includes a power supply with built-in surge protec-
tion..
An all-in-one mounting and power solution for rapid rollout
of wireless mesh infrastructure in metropolitan environments
SkyPilot MetroPole mount kit
KitSurge 1. •
Mounting bracket
Pole clamps
Hardware:
• 3/8-16x6” hex head bolts (4)
• 3/8 flat washers (4)
• 3/8 split washers (4)
Power supply with photocell
adapter (ANSI 136.10-compli-
ant) on a 3-foot or 20-foot
cable
Parts List
Use the provided bolts and clamps to attach the mounting bracket to the pole.
Position the mount so that cable terminating in a photocell adapter is oriented
towards the photocell—usually attached to the top of the street lamp.
Use a precision level to rotate the mount stand into a plumb position.
Tighten the axis screws to lock the stand into place.
Use the provided mounting bracket to attach the SkyExtender to the pole mount.
Note: If you’re installing a SkyExtender DualBand or SkyExtender TriBand, rotate the
device to ensure there is ample room for the omnidirectional antennas to clear the
mount stand.
2
3
Attach mount
1
Level
Axis screw
Photocell
adapter
Photocell
Power
supply
Level the mount
Attach the SkyExtender
SkyPilot Networks
Accessory Guide
Tools
Level
Socket wrench
with 3/8” socket
Philips screwdriver
