© Pan Acoustics GmbH
V 1.0
Page 2 of 7
Assembly Manual
TWM III
1. Introduction
Thank you for choosing a product from Pan Acoustics.
With the purchase of this accessory for Pan Beam and Pan Speaker systems, you have acquired a product
for safe mounting of the PB 04 | PB 08 | PB 16 | PB 24 | PB 32 | PB 40 and P 04-Pi | P 08-Pi | P 16-Pi
arrays on walls.
Please read this operating manual carefully prior to startup in order to guarantee fault-free operation.
This symbol provides important instructions for proper handling of the
product. Failure to observe this instruction may lead to damage to the
product or malfunctions.
1.1. Symbols and explanation
This symbol indicates a hazard with a high level of risk. If this hazard is not
prevented, severe injuries or death may result.
This symbol indicates a hazard with a moderate level of risk. If this hazard is
not prevented, moderate to severe injuries or death may result.
This symbol indicates a hazard with a moderate level of risk. Failure to
observe this instruction may lead to minor injuries or property damage.
All specifi cations in this operating manual are based on the product features available at the time of
production and the safety rules applicable at that time.
This operating manual describes the setup, function and connection of the TWM III for Pan Beam and
Pan Speaker systems. It is geared towards systems technicians and persons assigned the task of
installing and operating the system.
Technical specifi cations such as dimensions, weight and properties do not represent guaranteed prop-
erties. Pan Acoustics reserves the right to make changes and modifi cations without prior notice within
the scope of statutory regulations and product improvements.
This operating manual and all additional information required for operation must be read prior to
use by all persons involved in commissioning. The operating manual and all additional information
required must be kept within reach, near the device.
German is the original language of all Pan Acoustics operating manuals.
All necessary information and documents can be obtained from the Pan Acoustics website,
www.pan-acoustics.de/en/manuals.html
, or per email from
1.2. General information and target group
2. Product description
With the TWM III speaker accessory, a PB 04 | PB 08 | PB 16 | PB 24 | PB 32 | PB 40 and
P 02-Pi | P 04-Pi | P 08-Pi | P 16-Pi array can be easily and safely mounted on walls. The mount is
attached to the wall by means of dowel joints (not included in scope of delivery).
The mount is designed for both indoor and outdoor use.
Depending upon the speaker length, several brackets may be necessary. The mount is always
to be installed at the midpoint of the speaker/speaker module (PB 08).
