● Short press the privacy button, and there are two statuses that can tell out from the lit
led.
○ Red LED flash x 2 - Privacy mode on
○ Green LED flash x 2 - Privacy mode off
● Long press the privacy button for 5 seconds, and there are two statuses that can tell
out from the lit led.
○ Red LED flash x 2 + Beep x 2 tells the Privacy Mod is activated.
○ Green LED flash x 2 + Beep x 2 tells the Privacy Mode is closed.
● The Privacy Mode will be closed if the lock is opened via ways or re-power on.
● Once the Privacy Mode is activated, the lock will lock. If the lock remains open, the
Privacy Mode is not activated.
● When the lock is on Privacy Mode, only the physical key or the Owner’s Kapture app
can unlock the door from the outdoors. The Kapture app will tell the lock status, the
Privacy Mode is on, and be unable to cancel the Privacy Mode via the app.
● Stand-Alone Mode and LINK Mode.
○ The settings of the Privacy Mose will be in the record.
Low Battery Level
● 10% battery level goes to Low battery level.
● The interior Led flashes every 5 seconds till to run out of the power.
● Highly suggest replacing four new batteries to the lock. If the replacement still below
10% power level, the Led will keep flashing.
● In Stand-Alone Mode :
○ Low Battery Level will be recorded in the audit trail.
● In Link Mode
○ Low Battery Level will be recorded in the audit trail, in the meantime, a
real-time alert will be sent to the Owner’s and Family’s app.
Keypad Programming Commands
● In the Keypad Programming mode, you may follow below keypad commands to set
the lock after entering the Master code and pressing
button:
Operation
Keypad Sequence
Spec
Change Master Code
00
New Master Code
Default 147369
Master code always 6 digits
Clear All User Codes
88
Add User Code
01
User Code
輸入後永久有效
.
Variable-length 4-8
Delete User Code
02
User Code
6
