● The latch extends first when reconnecting the batteries with the lock unlocked.
● In Stand-Alone Mode :
○ After battery change, you need to access the lock via the Kapture app to
restart the audit trail.
○ A battery change will be recorded in the audit trail.
● In Link Mode :
○ After battery change, you need to access the lock via the Kapture app to
restart the audit trail.
○ A battery change will be recorded in the audit trail.
Access the lock via the keypad code
● Wake up the exterior panel to enter the keypad code.
● The keypad code can be 4-8 digits and consists of Arabic numbers(0~9). If lasts over
10 seconds between the code inputs, the keypad panel light will go out and the input
has to restart. Press
button to finish the entering. Press
button to cancel the
entering information. Each press beeps and flashes once at the same time.
● After pressing
button to finish the entering, a correct keypad code makes the lock
open accompanied by beeps and Led flashes in green twice, and an incorrect
keypad code makes the lock open accompanied by beeps and Led flashes in red
three times.
● In Stand-Alone Mode :
○ An audit trail remains. Access via the keypad codes is able to check the
person who is, however, you need to ensure a code belongs to the specific
person. Guest’s keypad code is unique, therefore, you can tell the person for
sure.
● In Link Mode :
○ An audit trail remains. Access via the keypad codes is able to check the
person who is, however, you need to ensure a code belongs to the specific
person. Guest’s keypad code is unique, therefore, you can tell the person for
sure.
○ A real-time event notifies the Owner and Family via the app. Access via the
keypad codes is able to check the person who is, however, you need to
ensure a code belongs to the specific person. Guest’s keypad code is unique,
therefore, you can tell the person for sure.
Lock/Unlock UI
● Lock/Unlock success, the lock beeps and LED flashes in green twice.
● Lock/Unlock fails, the lock beeps and LED flashes in red three times.
Privacy Mode
● Press the privacy button located on the top of the interior turnpiece to enter the
mode. The privacy button will flash after a success press and the Led inside will light.
5
