Palram 705949, Собрать

Страница: 5 / 19

EN
SAFETY ADVICE
1.
If using a stepladder or power tools please make sure that you follow the manufacturer’s
safety advice.
BEFORE ASSEMBLY
• •
Please read these instructions carefully before you start to assemble this product.
• •
Please carry out the steps in the order set out in these instructions.
• •
Keep these instructions in a safe place for future reference.
DURING ASSEMBLY
• •
The light fixture is waterproof in accordance with IP67 standard.
• •
The transformer is waterproof in accordance with IP67 standard.
• •
The controller is waterproof in accordance with IP68 standard.
• •
LED Type : 3500K.
• •
Light output : 700 Lumen.
• •
The mounting of the LED Light Strip is performed onto the screws channels in the aluminum
profiles.
When encountering the information icon, please refer to the relevant assembly
step for additional comments and assistance.
LED LIGHT STRIP WITH REMOTE DIMMER CONTROLLER - INFORMATION
TOOLS & EQUIPMENT
Silicone Philips Head Screwdriver
IMPORTANT ASSEMBLY STEPS
Step 2: Optional step in a situation where there is an excess of LED
strip:
When cutting the LED strip, cut according to the round
images, and seal the LED strip with silicone.