Paloma PH-203EWH, Руководство пользователя и инструкции по установке

Страница: 11 / 56

11
TEMPERATURE CONTROL – DELUXE
BATH FILL WATER The selected bath fill water volume is displayed in litres on all Deluxe
VOLUME display panel controllers. The selected bath fill water volume is displayed whenever the Bath
Fill mode is
on (ref
er to “Bath Fill Mode” on page 19) or when the bath fill water
volume is being adjusted and the Bath Fill mode is off.
If the bath fill water volume is being adjusted and the Bath Fill mode is off, then
the bath fill water volume display panel goes blank three (3) seconds after a
BATH FILL VOLUME button is last pressed.
At other times, if the Bath Fill mode is off, the bath fill water volume display panel
remains blank.
BATH FILL INDICATOR This light in the display panel will glow when the bath fill water volume is
LIGHT displayed.
BATH FILL TEMP. The up button increases the bath fill water temperature setting (refer to
∧
( up button)
“Temperature Adjustment – Deluxe Controllers” on page 14 and to “Bath Fill
Mode” on page 19).
BATH FILL TEMP. The down button decreases the bath fill water temperature setting (refer to
∨
( down button)
“Temperature Adjustment – Deluxe Controllers” on page 14 and to “Bath Fill
Mode” on page 19).
BATH FILL VOLUME The up button increases the bath fill water volume setting in increments of
∧
( up button) 10 litres up to 500 litres. A further setting of 990 litres can be selected.
BATH FILL VOLUME The down button decreases the bath fill water volume setting from 990 litres
∨
( down button) to 500 litres and in increments of 10 litres from 500 litres down to 10 litres.