PaloAlto Networks M-500, Справочное руководство

Страница: 17 / 32

Palo Alto Networks Installing the Hardware • 17
Connecting Cables to the Device
Connecting Cables to the Device
Figure 10 shows the M-500 appliance cable connections on the back of the device. See Table 1
for descriptions of the front panel and Table 2 for descriptions of the back panel interfaces.
Figure 10.
Serial Console Management
Optional ports 1 and 2 to used to
distribute Panorama or PAN-DB
traffic load
Back Panel Cable Connections
Connecting Power
To power on the M-500 appliance, plug two power cables into grounded wall outlets (using
separate circuits) and then attach them to each of the two power supplies on the back of the
M-500 appliance. After the power cords are connected, press the power button on the front of
the device to power on. If only one power supply is connected, a warning beep will sound.
CAUTION: You must use shielded interface cables that are grounded to ensure
agency compliance with electromagnetic emissions (EMC).