PaloAlto Networks M-500, Справочное руководство

Страница: 12 / 32

Equipment Rack Installation
12 • Installing the Hardware Palo Alto Networks
4. Attach the outer rail to the rack by pressing upward on the locking tab at the rear end of
the middle rail and then push the middle rail back into the outer rail. Hang the hooks of
the front of the outer rail onto the slots on the front of the rack as shown in Figure 5. Use
rack-mount screws to secure the outer rails to the rack.
Figure 5. Attach the Outer Rail to the Rack Posts
Outer Rail
Outer Rail
Front
Back
5. Pull out the rear of the outer rail to adjust the length until the rail fits within the posts of
the rack.
6. Hang the hooks of the rear portion of the outer rail onto the slots on the rear of the rack.
Use rack-mount screws to secure the rear of the outer rail to the rear of the rack as shown
in Figure 5.
7. Repeat these steps for the remaining rail.
8. Install the chassis into the rack by pulling the middle rail out from the front of the outer
rail, ensuring that the ball-bearing shuttle is at the front locking position of the middle
rail.
9. Align the chassis inner rails with the front of the middle rails and slide the inner rails on
the chassis into the middle rails, keeping even pressure on both sides until the locking tab