PaloAlto Networks M-500, Справочное руководство

Страница: 11 / 32

Palo Alto Networks Installing the Hardware • 11
Equipment Rack Installation
2. Pull the inner rail out of the outer rail until it is fully extended and then press the locking
tab down to release the inner rail as shown in Figure 3. Repeat this step on the other rail.
Figure 3. Remove the Inner Rail
Press
Down
Inner Rail
Middle Rail
Outer Rail
3. Install the left inner rail on the left side of the chassis and the right inner rail on the right
side of the chassis. The inner rails install over the mounting hooks and then slide forward
to lock in place. The mounting screw holes will be exposed at which time you can use the
provided screws to secure the inner rail to the chassis as shown in Figure 4.
Figure 4. Attach the Inner Rails to the Chassis
Left Inner Rail
Right Inner Rail
Note: Each inner rail has a locking tab, which locks the chassis into place when
installed and pushed fully into the rack. These tabs also lock the chassis in place
when fully extended from the rack to prevent the chassis from coming completely
out when servicing.